High temperature silicone heat resistant coating (200℃-1200℃)

*Vedio:

*Product Features:

1, Self-drying at room temperature;
2, Excellent heat resistance;
3, Excellent weather resistance;
4, Good water resistance and chemical resistance;
5, Strong adhesion;
6, Good mechanical properties;
7, The paint film does not fall off for a long time, does not blister, does not crack, does not chalk.

*Technical Datas:

HG/T 3362-2003

*Product Application:

It is widely used in metallurgy, aviation, electric power and other high temperature parts equipment, steel plant blast furnace, hot blast stove outer wall, high temperature chimney, flue, high temperature hot gas pipeline, heating furnace, heat exchanger and so on. The paint has room temperature drying resistance and high temperature and excellent mechanical properties.
Type I, 200℃/300℃， It is a variety of silicone heat-resistant paints, suitable for all kinds of equipment parts, such as large boilers, high temperature steam pipes, flue pipes, etc.
Type II, 400℃/500℃，It is a silver-white silicone heat-resistant paint suitable for coating steel parts, such as engine casings, exhaust pipes, mufflers, ovens, stoves, etc.;
Type III, 600℃/800℃，It is a black silicone ceramic heat-resistant paint suitable for special occasions.
Color available for different temperature:

*Matching Coating:

Silicone high temperature resistant paint can be used with zinc silicate shop primer, high temperature resistant primer (grey, iron red) + silicone high temperature resistant topcoat.

*Double coating interval time:

*Surface treatment:

Steel surface, must completely remove oil, scale, rust, old coating, etc., can take shot blasting or sand blasting method, up to the rust standard Sa2.5, roughness up to 30 ~ 70μm; can also color hand rust removal method , the rust removal standard St3, the roughness is 30~70μm.

*Construction method:

No air spraying and high-pressure airless spraying.

*Construction Condition:

1, the surface of the object to be coated must be cleaned, no moisture, no acid and alkali, no oil;
2, the tools used in construction must be dry and clean;
3, must use the special thinner, prohibiting the use of other types of paint. Spray viscosity is adjusted according to the construction site;
4, construction and drying time, the relative humidity is not more than 75%, otherwise it will cause the paint film to foam;
The construction site is well ventilated and wears the necessary protective equipment.

*Storage:

1, this product should be sealed and stored in a cool, dry, ventilated place, away from fire, waterproof, leak-proof, high temperature, sun exposure.
2, Under the above conditions, the storage period is 12 months from the date of production, and can continue to be used after passing the test, without affecting its effect.

*Package:

Paint：20Kg/Bucket or Customize