. Convenient construction, bright color, bright and hard;
. Good rust resistance;
. Good hard adhesion of paint film, high rust resistance;
. Strong water resistance, fast drying at room temperature
Mainly used for steel surface and anti-rust coating, mainly used for mechanical equipment, steel structure, pipeline, etc.
Alkyd red red antirust paint is suitable for rust prevention of ferrous metal surfaces such as bridges, iron towers, and large-scale steel equipment construction of vehicles. It cannot be used for aluminum plates, zinc plates, etc.
Item |
Standard |
Color |
Iron red, grey or other color |
Solid content, % |
≥39.5 |
flexibility, mm |
≤3 |
Flash point, ℃ |
38 |
Dry film thickness, um |
30-50 |
Drying time (25 degrees C), H |
surface dry≤ 2h, hard dry≤ 24h |
Salt Water resistance |
24 hrs, no blister, no fall off, no change color |
Reference Standard:HG/T 2009-1991
1. Air spraying and brushing are acceptable.
2. The substrate should be cleaned before use, without oil, dust, rust, etc.
3. The viscosity can be adjusted with X-6 alkyd diluent.
4. When spraying the topcoat, if the gloss is too high, it must be polished evenly with 120 mesh sandpaper or after the surface of the previous coat is dried and the construction is done before it is dried.
5. Alkyd anti-rust paint can not be directly used on zinc and aluminum substrates, and it has poor weather resistance when used alone, and should be used in conjunction with topcoat.
The surface of the primer should be clean, dry and pollution-free. Please pay attention to the coating interval between the construction and the primer.
All surfaces must be clean, dry and free of contamination. Before painting, should be assessed and treated in accordance with standard of the ISO8504:2000.
The surface of the primer should be clean, dry and pollution-free. Please pay attention to the coating interval between the construction and the primer.
The temperature of the base floor is not less than 5℃, and at least 3℃ than the air dew point temperature, the relative humidity must less than 85% (should be measured near the base material), fog, rain, snow, wind and rain is strictly prohibited construction.