Washable house interior wall emulsion paint

*Vedio:

*Product Features:

. Good decorative effect
. Convenient construction
. Low environmental pollution
. High cost-effective
. Widely application.

*Product Application:

It can be used in different collections such as cement mortar, masonry, concrete, gypsum board, etc. It has good leveling performance and can be naturally leveled after painting to ensure the smooth and beautiful wall surface.

*Technical Datas:

*Construction method:

1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

*Construction Parameters:

The temperature of the base floor is not less than 5℃, and at least 3℃ than the air dew point temperature, the relative humidity must less than 85% (should be measured near the base material), fog, rain, snow, wind and rain is strictly prohibited construction.
Recoating time

*Package:

Paint：25 Kg/Bucket
Curing Agent/Hardener：5Kg/Bucket
paint：curing agent/hardener=5:1(weight ratio)